industry Encyclopedia Where you are now:Home >> industry Encyclopedia

On the importance of color reproduction (for measurement) in electron microscope measurement applications

发布时间:2015-09-06
      

In the single CCD camera used for imaging and measurement, we understand that the image after interpolation processing is not suitable for practical applications for measurement purposes. The reason can be explained by the example on the right. The source image is composed of two areas of color and their closeness. The RGB value of the left half pixel is (0, 255, 128), and the right half pixel value is (0, 255, 144).

9.JPG

Color reproduction (for measurement)


Restore the interpolated image

10.JPG

The figure above shows the results of our interpolation on the source image. To simplify the calculation, we use the mean interpolation method (bilinear interpolation method) introduced in the color interpolation section. As a result, three images of red, green and blue colors are obtained. Histogram is a classic method to distinguish image areas. As shown on the right, the red image has only 64 gray level values of 0, while the green image has only 64 gray level values of 255. Therefore, these two pictures have no effect on distinguishing different regions. Only the blue histogram shows a "valley" between 32 128 values and 24 144 values. The eight grayscale values of 136 are the result of the low-pass effect of color interpolation. This effect obscures the originally clear boundary.



Restore original digital images

11.JPG

Histogram analysis of digital raw images directly has the following two advantages:


Can save two-thirds of the total redundant information;


Since interpolation processing is not used, interferences such as boundary blurring are avoided.


The three histograms again show that the red and green graphs are meaningless for our analysis. The blue histogram again accurately reflects the relationship of the source image. Some people may object that the mean interpolation method (bilinear interpolation method) is no longer used today because people have begun to use much more efficient algorithms. However, efficiency should be considered in conjunction with the optimization of imaging quality, and it is the human visual system that plays a role as a criterion. Therefore, from the perspective of measurement applications, efficient interpolation will cause different types of interference during image restoration.


Disclaimer: The article "The importance of color reproduction (for measurement) in the application of electron microscope measurement [Nuo Shiqi electron microscope]" comes to the Internet, the opinions expressed in the article do not represent the views of this site, the copyright of the article belongs to the original author, if any Infringement, please contact the webmaster of this site